Product Description
Product Specification
- Depth: 133mm
- Guarantee: 2 Years
- Head Type: Positive Head
- Height: 253mm
- Impeller Type: Centrifugal
- Max Pressure Rating: 1.4 Bar
- Pump Type: Single Impeller
- Width: 260mm
The Monsoon Extra Standard 1.4 bar max single pump is designed for use in larger domestic and light commercial applications. Installed into an open vented hot or cold water system, where all outlets are below the level of the cold water cistern, it has the equivalent effect of raising the cold water cistern 13 metres above its current position with a flow rate of 45 litres per minute.
Applications include boosting water pressures to individual outlets where a medium pressure is required. The pump is not recommended for use in pairs boosting common hot and cold supplies to mixer taps and shower valves (for applications such as this please refer to the Monsoon Extra Universal range). The Monsoon Extra Standard 1.4 bar max single is ideal as an outlet pump installed after a shower valve pumping to multiple shower heads in leisure centres and schools.
Technical Specification
| The Pump | |
| Inlet strainer | |
| Stuart hard face mechanical seal | |
| Flow switch sensitivity | approx. 1.0 l/min |
| Max. inlet head | 10 metres |
| Plumbing connection | 22 mm push-in |
| Flexible hose | 2 off 22 mm push-in x 300 mm long |
| Anti vibration feet | |
| WRAS no. | 0304065 |
| The Motor | |
| Power supply | 230/1/50 |
| Enclosure rating | IPX4 |
| Motor | Induction type permanent capacitor thermally protected |
| Power consumption | 445 Watts |
| Full load | 2.0 Amps |
| Fuse rating | 5 Amps |
| Pre wired | |
| Rating | Continuous (S1) |
| Gross weight (packed) | 6.9 Kg |
| 2 Year Guarantee | United Kingdom only |
| Part Number | 46387 (United Kingdom specification only) |













Reviews
There are no reviews yet.